Challenger 600E Series


— PERFORMANCE
  • The new AGCO Power™ engines in the MT600E generate mountains of torque at lower RPMs for unmatched lugging ability. With a long flat torque curve, you’ll get more work done at lower RPMs for savings on fuel while extending engine life.
— EASE OF USE
  • Onboard features allow you to work smarter than ever before. Plus, easy-to-perform routine maintenance and easy-to-access daily service points put you back in the field in no time.
— COMFORT
  • Enjoy the largest cab in its class with an amazingly low interior sound rating and a 360-degree view that’s second to none. World-class comfort equals world-class productivity.
Model MT645E MT655E MT665E MT675E MT685E
ENGINE PERFORMANCE
Maximum ISO engine HP @ 2,000 engine rpm (kW) 270 (199) 295 (220) 320 (239) 350 (261) 370 (276)
ISO engine HP @ 2,100 rated engine rpm (kW) 240 (177) 265 (198) 290 (216) 320 (239) 340 (254)
PTO HP @ 2,100 rated engine rpm (kW) 205 (151) 225 (168) 250 (186) 275 (205) 290 (216)
ENGINE
Type AGCO Power™ 8.4L
Number of cylinders 6
Displacement liters (CID) 8.4 (514)
Aspiration Twin Turbo Chargers with eWastegate
ELECTRICAL SYSTEM
Alternator / battery (standard) 240 amps / 12 V (twin 120 amp alternators)
TRANSMISSION
Type Techstar CVT with Power Management (PM) 31 mph (50 kph)
Field speed range 0.02 - 17 mph Forward and 0.02 - 10 mph Reverse (0.03 - 28 km/h Forward and 0.03 - 16 km/h Reverse)
Road speed range 0.02 - 31 mph Forward and 0.02 - 24 mph Reverse (0.03 - 50 km/h Forward and 0.03 - 38 km/h Reverse)
Road speed range - 40 kph -optional Optional - 0.02 - 30 mph Forward and 0.02 - 24 mph Reverse (0.03 - 40 km/h Forward and 0.03 - 38 km/h Reverse)
Speeds forward Infinite
Cruise control speeds 4
REAR AXLE
4.33 x 118 in. (110 x 2,999 mm) long axle Standard
4.33 x 105 in (110 x 2,550 mm) short axle Optional
Differential lock - full-locking, electrohydraulic Standard
FRONT AXLE
4-wheel drive differential lock Standard - Full-locking, Electro-hydraulic
4-wheel drive maximum steering angle 55°
HYDRAULICS
System Type Closed Center Load Sensing (CCLS)
Total flow rate - US standard gallon (L) 54 (205)
Maximum pressure PSI (bar) 2,900 (200)
Remote Valves - Standard/Optional Standard: 4 fingertip controlled valves
Optional: 2 additional fingertip controls for a total of 6 auxiliary valves
THREE POINT HITCH - REAR
Category 3/4N Quick Hitch Standard
Maximum lift capacity at Link Ends – lbs. (kg) 20,345 (9,228)
THREE POINT HITCH - FRONT (OPTIONAL)
Category 3 Standard
Maximum lift capacity at Link Ends – lbs. (kg) 10,970 (4,976)
DRAWBAR
Category 3 with drop pin Standard
Category 3 heavy duty with drop pin Optional
Category 4 with drop pin Optional
PTO
Speeds RPM - standard 1,000/1,000E
Shaft diameter in. (mm) 1.75 (45) shaft, 20 spline
OPERATOR AREA
Cab glass area ft² (m²) 67.3 (6.22)
Noise level dB(A) 71
OptiRide Plus hydraulic suspended cab Standard
Operator seat - air suspension Standard
TMC Display Standard
TECHNOLOGY
Auto-Guide 3000 Standard
AgCommand AgCommand-Ready Standard, Subscription Optional
DIMENSION & WEIGHT*
Wheelbase – in. (mm) 122 (3,100)
Overall length-front wt. frame to rear link arms – in. (mm) 218.6 (5,552)
Maximum height over cab – in. (mm) 141 (3,584)
Approx. shipping weight – lbs. (kg) 23,810 (10,800)
Max Allowable Weight – lbs. (kg) 33,070 (15,000)
CAPACITY
Fuel tank capacity US gallon (L) w/ e3 technology 166 (630)
DEF (AdBlue) usable tank capacity – US gallon (L) 15.8 (60)
*All dimensions measured with Dual 520/85R46 rear tires and 1480/70R34 front tires

REQUEST A QUOTE


VIEW BROCHURE


E-MAIL TO A FRIEND


PRINT