Hesston 2200 Series


The 2200 Series Large Square Balers are building on the advances of our popular 2100 Series and taking the technology even further and now include a ProCut™ Rotary Cutter option for a more precise cut with higher capacity, and simplified serviceability.

— CONTROL CENTRAL
  • Our C1000 monitor gives you greater visibility, increased functionality and a larger screen display - plus the option of running ag cam on your monitor
— PICK-UP AND GO
  • The 2200's wide, low profile design delivers superior pick-up - and with hydraulic pickup lift and gauge wheels, this baler can clear most obstacles
— FLAKY IS GOOD
  • To ensure dense & consistent bales, this simple, innovative design pre-forms each flake in a pre-compression chamber before moving it to the plunger
— HOOKING UP
  • All 2200s feature on-board hydraulics for easier hook-up, while eliminating the hydraulic system variables that can affect baler performance
— HIGHLY ORGANIZED
  • The 2200 maximizes capacity by pulling crop from the pick-up with revolving packer forks and positively feeding it into the pre-compression chamber
— NO SURPRISES
  • With the separate pre-compression chamber and auto bale density control, there are no surprises or windrow size worries - just tight, dense bales
— DOUBLE KNOTTED
  • Our double knotter system maintains that perfect bale after it leaves the chamber, through transport, all the way to its destination
  2250 2250PC 2270 2270XD 2290
BALE SIZE
Width: in. (mm) 34.4 (875) 47.2 (1,199)
Height: in. (mm) 31.5 (800) 34.4 (875) 50.2 (1,275)
Length: in. (mm) 108 (2,743)
DIMENSIONS & WEIGHT
Overall width w/single axle in. (mm) 102.2 (2,597) 118.1 (3,000) 129.6 (3,292)
Overall width w/tandem axles in. (mm) 108.2 (2,748) 118.1 (3,000)
Overall length: in. (mm) Without roller bale chute 303.9 (7,720) 305.2 (7,751) 320.9 (8,151) 324.4 (8,241)
Overall height: in. (mm)*
To top of folded hand rails
To top of raised hand rails
113.0 (2,870)
128.7 (3,270)
130.6 (3,317)
140.8 (3,576)
Weight: lbs (kgs)
Baler w/single axle 15,080 (6,840) 15,505 (7,033) 19,701 (8,936) 21,665 (9,827) 23,197 (10,522)
Baler w/single axle, Cutter 17,100 (7,756)   21,951 (10,896) 23,915 (10,847)  
Baler w/tandem axle, Packer version 16,400 (7,440) 16,825 (7,632) 21,361 (9,689) 23,325 (10,580) 24,321 (11,032)
Baler w/tandem axle, Cutter version 18,420 (8,356)   23,611(11,649) 25,575 (11,600)  
MAIN DRIVE
Driveline type & category All 2200 series balers can be driven by a Type 2 or Type 3 PTO and can have a Category 6 or 7 Implement Driveline (IDL)
Protection Overrunning, slip clutch and shear bolt
Gearbox Enclosed double reduction
OPTIFLOW PICKUP
Overall width w/pickup wheels: in. (mm) 117.9 (2,994)
Inside width: in. (mm) 89.0 (2,260)
Number of tines 64
Tine spacing: in. (mm) 2.6 (66)
CUTTER SYSTEM
Knife distance min mm/in. 38/1.5 116/4.6 38/1.5 NA
Total number of knives 17 6 26 (2 gangs of 13) NA
Knife removal Slide out knife bed, top removal (ProCut option only) NA
Knife activation, in-out Hydraulics (Packer Cutter option has spring engage only) NA
FEEDING SYSTEM
Packer Drive RC 100 Roller Chains
Stuffer protection Shear bolt on main drive sprocket
Stuffer Fingers 4 6
Packer protection Slip Clutch
Packer Crank Mechanism 4 bolt on packer control arms and 4 bolt hardened packer fingers 6 bolt on packer control arms and 6 bolt hardened packer fingers
Crank and bearing assembly 3 crank arms, 4 grease lubricated tapered roller bearings in 2 crank hubs 4 crank arms, 6 oil-bath lubricated tapered roller bearings in 3 crank hubs
PLUNGER
Speed: strokes / min. 47 33
Length of stroke: in. (mm) 29.1 (740) 32.8 (820)
Mounting All 2200 series balers have 2 front rollers w/tapered roller bearings, 2 rear rollers w/tapered roller bearings, two side rollers w/ball bearings
TYING MECHANISM
Knotters Four double knot Six double knot
Twine storage capacity 30 balls
Twine type High quality split film polypropylene or sisal twine
TIRES
Single Axle 600-50 x 22.5, 12 ply 700-50 x 22.5, 16 ply 28L x 26, 16 ply
Tandem Axle 500-50 x 17, 16 ply 500-45 x 22.5, 12 ply
Tandem axle upgrade 620/40R x 22.5 tires
LIGHTS
Work lamps, service lamps, rear lamps 3 work lamps, 5 service lamps, 4 rear lamps (2 amber and 2 red)
CONTROL & MONITORING SYSTEM
Type C1000 ISOBUS color terminal and Square Baler Controller (computer), C2100 monitor option, hydraulic and mechanical feedback systems
Baler controls Bale density and shape control, bale density door release from the terminal, optional moisture monitoring and control system, bale ejector control, control for the optional roller bale chute, control of the optional electronic knotter trip
OPTIONS
Packer cutter NA Optional NA
ProCut rotary cutter Optional NA Optional NA
Bale ejector Standard Optional
Auto chain lubrication system Optional
ACCUMULATOR (optional)
Accumulator Type 5 bale 3 bale
Tractor Requirements
Horsepower
Minimum: hp (kW) 120 (90) 150 (112) 130 (97) 150 (112)
Recommended: hp (kW) 150+ (112+) 180+ (134+) 170+ (127+) 180+ (134+)
Minimum w/cutter option: hp (kW) 180+ (134+) NA 200+ (149+) 210+ (157+) NA
PTO RPM 1,000
Minimum tractor weight: lbs. (kgs) Towing baler only, no accumulator 14,214 (6,448) 19,216 (8,716) 20,515 (9,305) 21,536 (9,769)
Tractor hydraulics 1 single acting cylinder for pickup lift, 1 double acting cylinder for cutter knives (if equipped), 1 double acting cylinder for tandem axle steering (if equipped)
Electrical system 12 volt DC
*Assuming models are equipped with equal tire sizes.

REQUEST A QUOTE


VIEW BROCHURE


E-MAIL TO A FRIEND


PRINT